Home > CZ Purlin Roll Forming Machine >

Single Station Steel Roll Forming Machine / C Channel Roll Forming Machine

Product Categories

Steel Sheet Roll Forming Machine [117]
Light Keel Roll Forming Machine [89]
CZ Purlin Roll Forming Machine [46]
Roof Roll Forming Machine [49]
Downspout Roll Forming Machine [18]
Double Layer Roll Forming Machine [26]
Panel Roll Forming Machine [16]
Door Frame Roll Forming Machine [15]
Corrugated Roll Forming Machine [14]
Ridge Cap Roll Forming Machine [21]
Highway Guardrail Roll Forming Machine [21]
Sandwich Panel Production Line [13]
Glazed Tile Machine [23]
Floor Decking Forming Machine [51]
Roller Shutter Door Machine [17]
Shelf Panel Roll Forming Machine [30]
Metal Slitting Line [11]
Metal Embossing Machine [4]
Profile Roll Forming Machine [28]

RFM Cold Rolling Forming Machinery

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Single Station Steel Roll Forming Machine / C Channel Roll Forming Machine

Model Number : c z purlin tile

Certification : CE

MOQ : 1 set

Payment Terms : T/T, L/C, Western Union

Supply Ability : 20 sets per month

Delivery Time : 30 workdays after we receive the 30% advance payment

Packaging Details : packed with waterproof cloth and card board in container

Tile Type : Colored Steel

Dimension(L*W*H) : 8000*1520*1500mm

Power(W) : 15kw

Voltage : 380v or any

Raw material thickness : 1.5-3 mm

Roller material : 45# Forged Steel

material of cutting blade : Cr12

Shaft material : bearing steel

Contact Now

Single Station C Z U Channel 400H Steel Roll Forming Machine 2-8 Ton

5T hydraulic decoiler:

Steel coil width: from 200 mm to 600 mm;

Internal diameter of coil: variable, from 470 mm to 510 mm
Maximal out diameter:1600mm
Maximum coil weight: 5000 Kg;
Oil cylinder dia.:100mm
Working speed: 0-15m/min adjustable
Main motor power: 5.5KW AC motor
Hydraulic power: 3kw
Speed controlled by frequency converter brand: Yaskawa
De-coiler should be with Loop control and hold down, and with baffle for forbid coil fall down
The decoiler have 4 segments

Single Station Steel Roll Forming Machine / C Channel Roll Forming Machine

Flattener:

The quantity of leveler rolls must be planned according to thickness 2mm to 3.0mm.
Flattener roller: upper is 3 rollers, down is 4 stations(total is 7 rollers)
Flattener roller material: SAE 1045 thermal treatment hardness 48-52 HRC.
Diameter of flattener shaft: ￠76mm, material is SAE 1045, hardening and tempering
Drive by motor: 4kw AC motor (Guomao of China)

Punching:

Base on customer provide punching drawing, this machine need adopt two units hydraulic punching system
The punches and dollies will be CR-12, hardness HRC 58-62 and chrome coating both punches and dolies should be easily replaceable without requiring disassembly of complete units.
The whole punching operation should be automated and controlled by a program installed in the PC which is located in the operator's console.
Hydraulic power: 5.5kw
Working pressure: 12-16Mpa

Pre-cutting :

Cutting type: hydraulic, connect with the punching hydraulic unit
Cutting power by hydraulic, 5.5KW AC motor
Hydraulic working pressure: 12-16Mpa
Feeding of the last cut profile from the equipment: automatic if the length of the last profile is not less than 1500 mm
Cutting motion: The roll forming part is NON-stop when cutting
Material of blade:Cr12 with heat treatment
Length measuring: Automatic encoder length measuring, brand: Omron
Tolerance of length: +/- 1.5mm each piece end product

Forming section

Thickness range: 1.5-3.0mm
Maximum production speed: not less than 10 meters per minute (for non-perforated profiles, excluding cutting)
Main motor power:15kw, AC motor, motor inside of main machine (Brand: Guomao of China)
Adjust flange and width motor: 1.5KW x3 motor inside of main machine (Brand: Guomao of China)
Machine Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
Roll station: 20 stations
Roller material:ASTM52100 chrome plated surface with hardness 58-62 degree ,CNC,
Shaft diameter: ￠76mm material: SAE1045 with quenching and tempering
Transmission: by gear box for each station

out table:

Unloading of the finished products from the table of cut profiles: manual
Frame: welding by tube
Size: about 2.0m long*0.6mwide*0.9mhigh
One out table with few support roller (base on final design)
Supporter roller: ASTM 1045 with chrome
Diameter of rollers: 55mm
Color: Blue or base on customer request
Quantity: 5 units

Hydraulic station:

Hydraulic power: 5.5kW
Working pressure: 12Mpa adjustable
Solenoid valve: 1 group
Hydraulic oil: 46# hydraulic oil
Color: Blue (or base on customer request)

Control carbinet:

1) Programmable setting of profile length and quantity
2) Automatic stopping of the equipment after completion of the cutting programme.

3) Operating system language: English and Chinese

4) Computer used to control length & quantity. Machine will automatically cut tolength and stop when required quantity is achieved
5) PLC brand: Panasonic
6) Frequency converter brand: Yaskawa, quantity: 1
7) Touch screen: Taiwan Weinview

Product Tags:

purlin roll forming machine

c purlin roll forming machine

Single Station Steel Roll Forming Machine / C Channel Roll Forming Machine Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	RFM Cold Rolling Forming Machinery
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!